San Marcos Custom Concrete: Driveways, Patios, Slabs & Stamped Concrete Contractors
San Marcos Custom Concrete provides expert residential and commercial concrete installation and repair services throughout San Marcos, TX, backed by over 20 years of experience. We specialize in custom concrete driveways, patios, foundations, decorative stamped concrete, exposed aggregate, and concrete repair solutions, with every project designed around your property's soil conditions, drainage, and long-term performance. Using fiber-reinforced concrete, proper rebar placement, and proven curing methods, we build durable concrete surfaces that withstand Central Texas' expansive clay soils, extreme heat, and seasonal ground movement.
Request a FREE Quote.
Get the numbers you need to plan with confidence—no pressure, just clear and honest pricing.
Why Choose Our San Marcos Concrete Contractors?
Custom Concrete Options for San Marcos Homes and Businesses
Decorative and Stamped Concrete Innovations
Stamped concrete replicates the look of stone, brick, wood, and slate at a fraction of the material cost. It works well for patios, pool decks, walkways, and concrete additions around the home.
We offer a range of decorative finish options, including:
- Stamped patterns – cobblestone, flagstone, herringbone, wood plank
- Stained finishes – acid stains and water-based stains in earth tones or bold colors
- Exposed aggregate – textured, slip-resistant surface with visible stone
- Broom finishes – clean, practical texture common on driveways and paths
- Custom borders – contrasting colors or patterns along edges
Concrete Flatwork for Modern Properties
Flatwork refers to any horizontal concrete surface poured and finished at grade level. This includes driveways, sidewalks, patios, and garage floors , some of the most common San Marcos concrete services we complete.
Flatwork Type | Common Use |
|---|---|
Driveways | Residential and commercial vehicle access |
Patios | Outdoor living and entertainment areas |
Sidewalks | Pedestrian paths connecting structures |
Garage slabs | Interior vehicle and storage floors |
Commercial and Industrial Concrete Solutions
Commercial concrete projects require heavier reinforcement, higher PSI mixes, and tighter tolerances than standard residential work. We handle concrete services for retail spaces, warehouses, office buildings, and rental properties across San Marcos.
Common commercial applications include:
- Heavy-duty slabs for equipment and vehicle traffic
- Tilt-up wall panels for warehouse construction
- Loading dock aprons built to handle repeated heavy loads
- Parking lots and access drives with proper drainage slope
Concrete Services in San Marcos, TX
Concrete Driveway Installation
We design each driveway around your property's layout, drainage needs, and load requirements. Our base preparation, including proper grading and compaction — is done before a single pour begins. This is what separates a driveway that holds up for decades from one that cracks within a few years.
What we consider for every driveway project:
- Soil compaction and subbase depth
- Reinforcement with rebar or wire mesh
- Proper slope for water drainage
- Edge finishing and control joint placement
- Sealer application after curing
Concrete Patio Construction
We design concrete patios to match your yard's dimensions, your preferred finish, and how the space will actually be used. Whether you want a simple broom-finished slab or a decorative stamped surface with borders, we build it to your specifications.
Finish options available for patios:
- Broom finish
- Stamped patterns
- Exposed aggregate
- Stained concrete
- Custom borders and textures
Concrete Foundation Pouring
We handle site grading, form setting, vapor barrier placement, and rebar layout before any concrete is poured. Each step affects the structural performance of the finished foundation. Skipping or rushing base work is one of the most common causes of foundation failure.
Foundation types we pour:
- Slab-on-grade foundations
- Pier and beam caps
- Foundation additions for home expansions
- Commercial structure foundations
Concrete Slab Installation
Concrete slabs serve a wide range of purposes, from garage floors and workshop pads to basketball courts and equipment bases.
Slab Type | Common Use |
|---|---|
Garage slab | Vehicle storage, workspace |
Equipment pad | HVAC units, generators |
Basketball slab | Recreational use |
Storage shed base | Outbuildings |
Commercial floor slab | Retail, warehouse, office |
Stamped Concrete Installation
We apply stamps and color hardeners before the concrete sets to create patterns pressed directly into the surface. The result is a textured, visually detailed finish that holds up under regular foot traffic and outdoor conditions.
Common stamped concrete patterns we install:
- Ashlar slate
- Cobblestone
- Herringbone brick
- Wood plank
- Random stone
Concrete Repair & Resurfacing
We assess the damage first to determine whether repair or full resurfacing is the right approach. Surface cracks, spalling, and minor settling can often be addressed with resurfacing techniques that bond a new layer over the existing slab.
Signs your concrete may need repair:
- Visible surface cracks
- Flaking or pitting
- Uneven or sunken sections
- Discoloration from water damage
- Deteriorating edges
Concrete Materials and Installation Methods
Selecting High-Quality Concrete
We use concrete mixes matched to the load requirements and intended use of each surface. A standard residential driveway typically uses a 3,000–4,000 PSI mix, while heavier commercial applications may require 4,000–5,000 PSI or higher.
We also apply:
- Reinforcement- rebar or wire mesh to resist shifting and cracking
- Sealers- to protect against moisture, staining, and UV exposure
- Proper curing methods- to strengthen the slab as it sets
Innovative Installation Techniques
We focus on precise forming, consistent pour depth, and controlled finishing to produce surfaces that hold up over time.
For stamped concrete, timing the stamping process correctly is critical. The pattern must be pressed before the concrete sets too firm, but not so early that it loses definition.
Key techniques we apply:
Technique | Purpose |
|---|---|
Control joint cutting | Directs cracking to planned locations |
Broom or trowel finishing | Controls surface texture and traction |
Fiber reinforcement | Adds tensile strength to the mix |
Gradual curing | Prevents surface cracking from rapid drying |
Importance of Proper Planning
Rushing base preparation is one of the most common causes of concrete failure. Before any pour, we grade and compact the sub-base, set forms at the correct elevation, and plan for drainage.
Drainage planning is especially relevant in San Marcos, where Hill Country terrain creates slope and runoff challenges. Water that pools under a slab will erode the base and cause settlement over time.
Customer Reviews From San Marcos Concrete Projects
"San Marcos Custom Concrete did an excellent job on our new driveway. The crew was professional, showed up on time, and made sure everything was finished cleanly and evenly. Our driveway looks strong, smooth, and built to last. We're very happy with the results."
Daniel Ramirez
San Marcos, TX
"We wanted to turn our backyard into a more usable outdoor space, and the team delivered exactly what we had in mind. Our new concrete patio looks beautiful and gives us the perfect place to relax, grill, and spend time with family. The quality of work was outstanding."
Melissa Grant
Kyle, TX
"Our old concrete surface was cracked, worn, and uneven, but San Marcos Custom Concrete made it look new again. They explained the repair process clearly and completed the resurfacing with great attention to detail. The finished result looks clean, durable, and much better than we expected."
Amanda Collins
Buda, TX
"We hired San Marcos Custom Concrete for a foundation pour on our new building project, and they handled everything with care and precision. The team was knowledgeable, efficient, and easy to work with from start to finish. The foundation turned out solid and professionally done."
Robert Hayes
New Braunfels, TX
Concrete Service FAQs for San Marcos, TX Property Owners
Concrete project costs in San Marcos, TX vary based on square footage, design complexity, surface finish, and site preparation requirements. A standard concrete driveway typically starts at $6 to $12 per square foot, while decorative or stamped concrete can range from $12 to $25 per square foot or more. San Marcos Custom Concrete provides free on-site estimates so you get an accurate quote tailored to your specific project before any work begins.
Most residential concrete projects in San Marcos, TX are completed within one to three days, depending on the size and scope of the job. Decorative or stamped concrete finishes may require additional time for curing and sealing. Concrete generally reaches full strength within 28 days, though most surfaces are ready for light foot traffic within 24 to 48 hours after the pour.
Permit requirements in San Marcos, TX depend on the type and size of your project. Driveways, retaining walls, and certain structural concrete installations may require a building permit through the City of San Marcos Development Services Department. San Marcos Custom Concrete guides clients through the local permitting process and handles the necessary paperwork so your project moves forward without delays.
San Marcos, TX summers bring intense heat and UV exposure that can cause concrete to crack or fade over time. Applying a quality concrete sealer every two to three years protects your surfaces from moisture, staining, and thermal expansion. Avoid using harsh chemical deicers in winter months and keep expansion joints clear of debris. San Marcos Custom Concrete offers professional sealing services and maintenance guidance to extend the life of your investment.
San Marcos Custom Concrete brings over 20 years of experience serving homeowners and commercial property owners throughout San Marcos, TX and the greater Hays County area. Our team uses premium concrete mixes, proven installation techniques, and meticulous attention to detail on every project. We are locally operated, fully licensed and insured, and committed to delivering results that stand up to the Texas climate for decades to come.